Pedestrian
Mono-Mast or Standard-Mast
With optional initial lift / lithium-Ion battery
Capacity: 1000 kg
WS10M(i) / WS10
WS10 1000 kg
WS10M 1000 kg
WS10Mi 1000 kg
max. 1000 kg
max. 3300 mm
max. 4 km/h
0,65 kW
max. 72 Ah/5hr
min. 2057 mm
Ideal for light applications or as a mobile work table
The WS10M and WS10Mi are the entry-level models in the high lift truck range. Ideal for transport over short distances or can also be used as a mobile work table. The mono-lift trucks have a maximum load capacity of 1000 kg. This makes the high-lift trucks ideal helpers in a wide range of applications. The WS10 with standard mast has a higher maximum lifting height of up to 3300 mm and can therefore also reach higher storage locations. All models in this series are suitable for light and occasional use. The WS10Mi is equipped with initial lift. This makes it excellent for use on uneven floors.

Ergonomic and safe
- Simple and quick execution of control commands
- Automatically damped braking and return to neutral when the tiller is released
- Ergonomic tiller buttons
- Identical control of all driving commands for left- and right-handers
-
Ergonomic and safe
- Simple and quick execution of control commands
- Automatically damped braking and return to neutral when the tiller is released
- Ergonomic tiller buttons
- Identical control of all driving commands for left- and right-handers
-
Maintenance-free monobloc batteries
- With maintenance-free monobloc batteries and built-in charger, the battery can be recharged at any 230-volt power socket
-
Low set frame
- prevents foot injuries


Lithium-Ion-Battery
Thanks to fast charging times with lithium-ion battery, the WS10 can be used almost without interruption. Recharging the Li-Ion battery (24 volts / 80 Ah) is possible through the integrated charger with 24 volts 30 at any 230 volt socket.

Low truck weight and compact
The compact design of this series enables it to be used in space-critical work areas as well as in very narrow aisles. Only a small amount of force is required to steer the manoeuvrable lift truck. This reduces the operator's workload. Due to the low service weight and the resulting lower floor load, use on intermediate levels is also possible.

Version with initial lift
The WS10Mi with initial lift can be used safely and precisely on small ramps and uneven floors, e.g. on weighing equipment.

Safety
The tiller is suitable for left and right-handed operators and enables precise operation of all drive and lift functions. Due to the large field of vision provided by the mast profiles, the operator always has the forks and the load in view. The mono masts also provide a good view of the fork tips. This ensures precise positioning of the unit and fast and safe pick-up of loads.
In addition, the WS10 models have deep truck frames to protect the feet of anyone near the truck. The WS10 with standard mast also has a maximum travel speed that depends on the lift height.

Battery and charging technology
With maintenance-free block batteries and a built-in charger, the battery can be recharged at any 230-volt socket. This guarantees flexible and decentralised battery recharging. The truck display informs the operator about the battery charge status as well as the operating hours.

Ergonomic and safe tiller
- Safe material handling
- Intuitive controls
- Suitable for left- and right-handers

28 June 2022 – Clark introduces new high-lift truck with mono mast and initial lift
Nimble all-rounder
Duisburg, 28 June 2022 – Clark has expanded its product range in the area of pallet trucks with another lift truck. The new WS10Mi is a high-lift truck with mono-mast and initial lift.