28 June 2022 – Clark introduces new high-lift truck with mono mast and initial lift

The WS10Mi is suitable for stacking applications up to a lifting height of 1955 mm
The WS10Mi is suitable for stacking applications up to a lifting height of 1955 mm


Nimble all-rounder

Duisburg, 28 June 2022 – Clark has expanded its product range in the area of pallet trucks with another lift truck. The new WS10Mi is a high-lift truck with mono-mast and initial lift.

The WS10Mi is one of the entry-level models in the world of high-lift trucks. Thanks to its mono-lift mast and its maximum load capacity of up to 1000 kg (1200 kg initial lift), the areas of application of this nimble warehouse helper are many: The vehicle is suitable for transport over short distances, for stacking applications up to a lifting height of 1955 mm or also as a mobile, ergonomic work table. The WS10Mi comes into its own especially when used on uneven floors, smaller ramps or weighing equipment, as the WS10Mi effortlessly overcomes inclines thanks to its initial lift (115 mm).


Light and compact


The compact design of the high-lift truck also allows it to be used in space-critical work areas, for example in narrow racking aisles. The length of the truck including the back of the forks (l2) is just 600 mm. Only a small amount of force is required to steer the manoeuvrable lift truck. This conserves the operator's strength and relieves him of his workload. Due to the low vehicle weight of 520 kg (including battery) and the resulting lower ground load, the vehicle can also be used on intermediate levels.


Safe and ergonomic load handling


The handle-optimised vehicle drawbar enables precise operation of all travel and lifting functions. In addition, the mono-lift frame offers the best possible view of the fork tips. The operator always keeps an overview and can position the unit safely and precisely as well as thread it unerringly into pallets. Like all models in the WS10 range, the WS10Mi has a low-slung vehicle frame to protect the operator's feet and those around the vehicle.


Fast recharging for long service life


The WS10Mi is equipped with maintenance-free block batteries and a built-in charger. This allows the battery to be recharged at any 230-volt socket. This increases availability and simplifies handling. The vehicle display informs the operator about the battery charge level as well as the operating hours driven.


Electric stacker WS10M(i) / WS10

Electric stacker WS10M(i) / WS10

Mono-Mast or Standard-Mast
With optional initial lift
Capacity: 1000 kg

WS10M(i) / WS10


Read more